The itel IPL-51100 lithium battery is a wall-mounted LiFePO₄ (Lithium Iron Phosphate) energy storage system designed for 48V inverter architectures. It is built for large homes, duplexes, offices, CCTV hubs, and medium commercial solar hybrid systems where higher efficiency, lower current flow, and stronger load handling are required.
This model belongs to the premium 48V lithium class and is designed for higher power inverter systems compared to 24V setups.
• Model: ITEL IPL-51100
• Battery Chemistry: Lithium Iron Phosphate (LiFePO₄)
• Nominal Voltage: 51.2V (48V system class)
• Rated Capacity: 100Ah
• Total Energy Storage: 5.12kWh (5120Wh)
• Battery Configuration: 16S (16 cells in series)
• Operating Voltage Range: ~44.8V – 58.4V
• Standard Charge Current: ~25A – 50A
• Recommended Charge Current: ~25A – 40A (for longer lifespan)
• Max Continuous Discharge: ~80A – 120A
• Peak Discharge: High short-duration surge capability
• Round Trip Efficiency: ~90% – 95%
• Cycle Life: ~4000 – 6000 cycles @ 80% Depth of Discharge
• Design Life: 8 – 12 years typical usage
The IPL-51100 includes an advanced Battery Management System (BMS) that ensures safety, stability, and smart energy control.
• Overcharge protection
• Over-discharge protection
• Overcurrent protection
• Short-circuit protection
• Temperature protection
• Automatic cell balancing system
• RS485 communication protocol
• CAN bus support (compatible hybrid inverters)
• Real-time SOC monitoring
• Smart inverter charging coordination
• Fault detection and alerts
The ITEL IPL-51100 (5.12kWh / 48V) is suitable for:
• Large residential apartments
• Duplex homes
• Small offices and corporate setups
• CCTV/security control rooms
• Retail shops and supermarkets
• Medium solar hybrid installations
INVERTER COMPATIBILITY
Best matched with:
• 48V pure sine wave inverters (3kW – 8kW range)
• Hybrid solar inverter systems
• MPPT solar charge controllers (48V systems)
• Generator/grid hybrid backup systems
• Faster and more stable charging compared to 24V systems
• Lower current flow reduces heat and cable stress
• High solar charging efficiency
• Stable performance under unstable grid conditions
• Optimized for daily deep cycling
• 1 unit = 5.12kWh
• 2 units = 10.24kWh system
• 3 units = 15.36kWh system
• 4+ units = scalable energy storage bank
• Fully parallel expandable (inverter dependent)
• Charging temperature: 0°C – 55°C
• Discharge temperature: -20°C – 60°C
• Storage temperature: -10°C – 50°C
• Recommended installation: indoor ventilated environment
• Designed for tropical climates like Nigeria
• Wall-mounted / rack-mounted lithium cabinet design
• Compact high-density energy storage system
• Maintenance-free operation
• Cleaner installation compared to tubular batteries
• Modular and scalable structure
• LED lighting
• Ceiling fans
• Wi-Fi router
• CCTV system
• Energy-efficient refrigerator
• TV + decoder
• Fans + lighting
• Laptops + office equipment
• Fridge + freezer + electronics
• Water pump (intermittent use)
• Small AC support (inverter dependent)
• ~90% usable energy efficiency
• Stable voltage output (no sudden drop like lead-acid batteries)
• Faster recharge cycles
• Lower heat generation
• Higher overall efficiency
• Strong deep-cycle performance
• 5.12kWh high-capacity lithium storage
• 48V high-efficiency architecture
• Long lifespan (8–12 years typical)
• Maintenance-free operation
• Fast charging capability
• Smart inverter communication (RS485/CAN)
• Stable output under load
• Modular expansion capability
• Compact professional design
• Advanced BMS safety system
• Must be used ONLY with 48V inverter systems
• Do NOT mix with 24V or tubular batteries
• All parallel batteries must match exactly (same model/batch)
• Enable lithium battery mode on inverter
• Install in ventilated indoor environment
• Do not exceed inverter load rating
The ITEL IPL-51100 (5.12kWh / 51.2V lithium battery) is a high-performance 48V LiFePO₄ energy storage system designed for medium to large inverter and solar hybrid installations.
It delivers stronger load capacity, lower current stress, higher efficiency, and longer system stability, making it ideal for 4kW–8kW inverter systems used in homes, offices, and commercial environments.
There are no reviews yet.