The itel 8kW / 48V Hybrid Inverter is a high-capacity, advanced energy management system designed for large residential properties, duplexes, small hotels, schools, churches, offices, and light commercial facilities. It combines a pure sine wave inverter, dual MPPT solar charge controller (on supported models), intelligent battery charging system, and smart energy management into one integrated platform.
This system is built on a 48V DC architecture, requiring either four (4) 12V deep-cycle batteries connected in series or a compatible 48V lithium-ion / LiFePO₄ battery bank. With a strong continuous output of 8000 Watts, it is capable of running multiple heavy appliances simultaneously, including air conditioners, pumping machines, refrigeration systems, and office infrastructure.
• Model: itel 8kW Hybrid Inverter (IPV-8K48 Series)
• Rated Capacity: 8000W / 8000VA
• Battery System Voltage: 48V DC
• Battery Requirement: 4 × 12V Batteries (Series Connection)
• Output Waveform: Pure Sine Wave
• Built-in MPPT Solar Charge Controller (High Efficiency)
• Dual MPPT Support (Model Dependent)
• Maximum Solar PV Input: Up to 8000W – 10000W (variant dependent)
• MPPT Voltage Range: 90V – 450V DC
• Maximum PV Input Voltage: 500V DC
• Solar Charging Current: High-current fast charging (up to ~150A class depending on model)
• Utility/Grid Charging Support
• Generator Compatibility
• Lithium-Ion Battery Enabled
• LiFePO₄ Battery Compatible
• Smart LCD Display Interface
• WiFi Monitoring & Mobile App Support
• Intelligent Cooling System
• Heavy-Duty Surge Protection
• Overload, Short Circuit & Over-Temperature Protection
• Parallel Operation Support (Expandable Systems)
The inverter uses advanced MPPT (Maximum Power Point Tracking) technology to maximize solar energy harvesting.
• Faster battery charging
• Improved solar efficiency
• Stable performance in low sunlight
• Reduced energy losses
• Better system stability
Some models include dual MPPT trackers for independent solar arrays.
The inverter automatically manages multiple power sources:
• Solar energy
• Utility/grid electricity
• Generator input
• Battery storage
Operating modes include:
• Solar First Mode
• Utility First Mode
• Battery First Mode
• Hybrid Mode
The LCD display + app provides:
• Solar input power
• Battery voltage & SOC
• Load consumption
• Grid status
• Fault alerts
• System temperature
• Operating mode
Supported battery types:
• Tall Tubular Batteries
• AGM Batteries
• Gel Batteries
• Lithium-Ion Batteries
• LiFePO₄ Batteries
• Faster charging
• Higher efficiency
• Deep discharge capability (90–95%)
• Long lifespan (8–15 years)
• Low maintenance
• Compact design
• Better performance under heavy cycling
• Real-time monitoring
• Accurate SOC display
• Smart charging control
• Temperature protection
• Overcharge/over-discharge protection
• 2–3 Air Conditioners (1.0HP–1.5HP)
• 2 Refrigerators / Freezers
• Water Pump (0.5HP–1HP)
• 3–4 Smart TVs
• Ceiling Fans (8–12 units)
• 20–30 LED lights
• CCTV system
• Routers & networking
• Laptops & office devices
• Office computers
• Printers
• Networking systems
• Retail refrigeration
• CCTV surveillance
• Lighting systems
• Church PA systems
• Projectors
• Classroom lighting
• Administrative offices
• Security systems
Avoid running heavy heating appliances simultaneously:
• Electric kettles
• Irons
• Microwaves
• Cookers
• Industrial heaters
• 8 × 550W = 4.4kW
• 10 × 550W = 5.5kW
• 12 × 550W = 6.6kW
• 14–16 × 550W = 7.7–8.8kW
(Max depends on inverter PV input rating ~450–500V)
• 4 × 200Ah Tall Tubular Batteries
• Lifespan: 4–6 years
• Reliable and widely used
• 48V Lithium Battery Bank
• Lifespan: 8–15 years
• Higher efficiency
• Faster charging
• Low maintenance
• 15–18 hours
• 5–7 hours
• 3–4 hours
• 1.5–2.5 hours
• Duplex homes
• Hotels
• Churches
• Schools
• Clinics
• Offices
• Supermarkets
• SMEs
• Security systems
• Agricultural facilities
• 8000W high output
• 48V architecture
• Pure sine wave
• MPPT solar charging
• Lithium battery ready
• LiFePO₄ support
• WiFi monitoring
• Generator compatible
• Parallel expansion
• Smart energy control
• Full protection systems
The itel 8kW / 48V Hybrid Inverter is a powerful, scalable energy system designed for heavy residential and light commercial use. With support for both lead-acid and lithium battery technologies, advanced MPPT solar charging, and smart energy management, it delivers strong performance, flexibility, and long-term reliability for modern power needs.
There are no reviews yet.