Ut tellus dolor, dapibus eget, elementum ifend cursus eleifend, elit. Aenea ifen dn tor wisi Aliquam er at volutpat. Dui ac tui end cursus eleifendrpis.
The Felicity Solar IVPS 5kVA Inverter is a highly durable, transformer-based, low-frequency, non-hybrid off-grid inverter. It is specifically engineered to provide clean, pure sine wave backup power for homes and small businesses. Unlike lighter high-frequency models, this heavy-duty, copper-transformer-based inverter excels at handling high-surge inductive loads like water pumping machines, large refrigerators, and air conditioners. It acts as an exceptionally reliable power hub in regions with highly unstable electrical grids.
Core Technical Specifications & Architecture
Power & Performance Blueprint
Rated Output Power Capacity: 5,000VA / 4,000 Watts (4kW maximum continuous load).
Output Waveform: Pure Sine Wave (guarantees safe, noise-free operation for sensitive medical gear, servers, and electronics).
Grid Voltage Adaptability: Handles a wide AC input range of 90V to 280V AC, allowing it to charge batteries even from low-voltage grid lines or fluctuating generators.
Line Mode Efficiency: Exceeds 95% efficiency when operating directly on utility power.
Transfer Time: 15 milliseconds typical transition. This provides a rapid, automated power switch during sudden grid blackouts to prevent equipment resets.
Voltage Variant Configurations
The IVPS 5kVA series is manufactured in two distinct, non-interchangeable battery voltage models. This allows you to choose the exact match for your planned battery bank architecture:
Model IVPS5024 (24V System): Optimized for smaller setups utilizing a 24V battery bank layout.
Model IVPS5048 (48V System): Optimized for mid-to-large setups utilizing a 48V/51.2V battery bank layout (highly recommended for modern lithium integration).
Key Engineering Features & Operational Modes
Heavy-Duty Copper Transformer Build
At the core of the IVPS series is a low-frequency copper transformer. This design grants the inverter massive surge overhead, allowing it to temporarily pull multiple times its rated wattage to kick-start heavy motorized appliances without tripping or damaging internal circuits. This makes it far more structurally resilient than standard high-frequency hybrid alternatives.
Non-Hybrid Solar Approach
This unit is classified as a non-hybrid system, meaning it focuses entirely on high-efficiency power inversion and battery charging via utility grid power or a diesel/gasoline generator.
Solar Integration: To run this system on solar power, you must pair it with an external MPPT or PWM solar charge controller to regulate the raw power coming down from your solar panel arrays.
Upgraded Smart Lithium Communication
Unlike older generation low-frequency inverters that only support traditional lead-acid batteries, the modern IVPS features built-in smart BMS communication protocols. This allows the inverter to talk directly to advanced lithium battery management systems, facilitating accurate state-of-charge calculation, protective cut-offs, and optimized lithium charging profiles.
User-Configurable Priority Modes
The inverter can be fine-tuned via its front interface to prioritize power routing based on your current energy strategy:
Grid-Priority Mode: Runs the property on utility power whenever the grid is active, keeping the battery bank fully topped up at all times for sudden emergencies.
Battery-Priority Mode: Prioritizes running your property off stored battery energy (or connected external solar arrays), switching over to grid power only when the battery drops to a pre-configured low-voltage threshold.
Real-World Load Management (4,000W Max Limit)
To maintain long-term structural health, a power system should ideally run within a 75% to 80% maximum continuous safety threshold (~3,000W to 3,200W). Below is how this 4,000W capacity distributes across typical real-world load configurations:
🟢 Small Office / Standard Home Load (~1,200 Watts)
Connected Load Status: Perfectly safe for continuous 24/7 runtime.
3x Standard Office Workstations / Laptops (250W total).
5x Ceiling Fans (350W total).
1x Smart TV, Sound System, and Decoder (180W).
15x LED Light Bulbs (150W total).
1x Wi-Fi Router and CCTV Security Hub (50W).
🟡 Medium/Heavy Household Load (~2,800 Watts)
Connected Load Status: Well within the normal working limits of the transformer.
Appliances:
All items from the Standard Home Load profile (~1,200W).
1x Inverter-Type Air Conditioner (1.0 HP or 1.5 HP running at ~1,200W continuous).
1x Home Water Booster Pump (400W).
🔴 Peak Load / High Inductive Limit (~3,800 Watts)
Connected Load Status: Approaching the upper operating ceiling. Intermittent items must be managed carefully.
Appliances:
All items from the Standard Home Load profile (~1,200W).
1x Standard Deep Freezer (300W).
1x 1 HP AC Clean-Water Pumping Machine (approx. 800W running load / up to 2,400W short-term inductive startup surge).
1x Kitchen Microwave (1,500W run briefly).
Important Safety Note: While the copper transformer can comfortably absorb the high startup surge of water pumps and air conditioners, running a heating appliance like an electric boiling kettle (2,000W+) simultaneously with other heavy loads will trigger an overcurrent overload shutdown.
Battery Bank Configuration Matching
Depending on which specific model variant you acquire, your battery bank must be wired precisely to match the nominal DC input voltage:
For the 24V Model (IVPS5024):
Tubular/Gel Options: Requires 2x 12V lead-acid batteries connected in a series string.
There are no reviews yet.